The Braze Mate is the ideal automatic brazing machine for low volume applications or short runs of various part styles.
In production, an operator loads the part into a stainless steel fixture. A premeasured deposit of Fusion Paste Alloy is applied to the joint area with a hand-held applicator gun. As an option, this gun can be mounted to an automatic slide. The operator then activates dual, zero-pressure “touch” buttons, which initiates the machine cycle.
Automatically, a fixed pattern of gas/air burners advances into heating position. Oscillating flames eliminate “hot spots” at the assembly joint area. Once joining temperature is reached, the burner manifold retracts into idle position. A gradual air and water cooling sequence is followed by manual part inspection and final unloading. Depending on the application, 1 or 2 parts can be run each cycle.




Fusion offers three Braze Mate machine models:
Braze Mate 100
- Dimensions: 36″ x 48″
- Single heat system; gas/air
- Typical Rate: 60 parts per hour maximum
Braze Mate 100/150/200 Standard Features >>
Braze Mate 100 LS
- Dimensions: 40″ x 60″
- Single heat system; gas/air
- Typical Rate: 40-70 parts per hour
- Recommended for more complex assemblies with longer operator load times
Braze Mate 100/150/200 Standard Features >>
Braze Mate 150
- Dimensions: 72″ x 48″
- Single heat system; gas/air
- Typical Rate: 60-120 parts per hour maximum
- Recommended for large, multiple joint parts, or for running multiple, identical parts simultaneously.
Braze Mate 100/150/200 Standard Features >>
Braze Mate 200
- Dimensions: 72″ x 48″
- Dual heat systems; gas/air
- Typical Rate: 120 parts per hour maximum
- Heat systems are independently controlled so different parts can be joined simultaneously.
Braze Mate 100/150/200 Standard Features >>
USA: (440) 946-3300
EUROPE: +44 (0) 1279 443 122
Find Your Fusion Rep: USA | AMERICAS | EUROPE | ASIA-PACIFIC
Fusion Equipment in Action: Applications & Videos >>