Brazing Machine Specification

• Assembly: Three-piece copper tubular (2 tube joints; seal small hole in spun tube end).
• Paste Filler Metal: Fusion LHK-1302-750 (BcuP 6 paste) 1445°F liquidus
• Production Rate: 350 parts per hour, one operator.
• Dimensions: 72" X 72" welded steel base, 42" dia. Stainless steel tool plate cover, stainless water trough, PDC 18" direct drive indexer.
• Utilities: Electrical 220/440 VAC, 3PH, Control voltage 24VDC, Gas (120 CFH) Water (1 gallon/minute) Compressed air (30 CFM)
• PLC: Allen Bradley SLC 500 with DTAM access panel.
• Safety Features: Sliding Lexan ® guards on 3 sides of machine with safety interlock switches; stainless vent hood.
• Options: Nitrogen purge interior tube walls; Gas Flux to reduce copper oxidation during heating; 110 gallon Cooling Water Recirculating System.
• Sequence:

Station 1 -	Load/Unload Assembly
Station 2 -	Open
Station 3 -	Apply paste automatically
Station 4 -	Open
Station 5 -	Heat
Station 6 -	Heat
Station 7 -	Heat
Station 8 -	Air Cool
Station 9 -	Water cool part and fixture
Station 10-	Open