Let Fusion Braze your Parts!
Do you have
a brazing operation you would like to outsource? Or, are you
being asked to braze parts, but have zero experience? Consider
having Fusion braze or solder the parts for you.
The first
step under Fusion's Contract Brazing/Soldering Program is to
join sample parts on a lab basis. These sample parts are then
submitted to you with a per piece cost based on production runs
per week or month. Typically, parts are run in lots of 1,000,
5,000, 10,000, and 15,000 plus. Generally, the higher the production
run, the lower the cost per part.
In addition
to the per piece cost, there is a separate, "setup charge"
for fixturing and preparing a lab machine for the initial brazing
run. The setup costs can be included in the per piece charge
as long as future, specific production runs can be guaranteed. |
Copper
couplings contract soldered on
Fusion Lab Machine |
An inherent
advantage of contract brazing with Fusion is if your production
levels increase to the point where automatic equipment can be
justified. We can then use the data gathered during the contract
brazing period and apply it toward a new machine quote. Typically,
the existing tooling can be mounted on the machine, the process
is time-proven, and you can be brazing in-house!
If you
think Contract Brazing could benefit your current situation, click
here and let us know. |
