Brazing Machine Specification

• Assembly: Two (3003 series) tubes to (6063 series) block.
• Paste Filler Metal: Fusion NDA-1070-400 (corrosive flux)
• Production Rate: 200 parts per hour, one operator.
• Dimensions: 70" X 70" welded steel base, 42" diameter aluminum tool plate, PDC 18" direct drive indexer.
• Utilities: Electrical 208V, 3PH, 60HZ (415V, 3PH, 50HZ), Control Voltage 24VDC, Gas (80 CFH) Water (1-2 gallons/minute) Compressed Air (30 CFM)
• PLC: General Electric 90/30.
• Safety Features: Sliding Lexan® guards on 3 slides of machine with safety interlock switches; light curtain mounted at operator station.
• Options: Inconel fixtures; machine built to CE European specifications.
• Sequence:

Station 1 -	Load/Unload Assembly
Station 2 -	Apply Paste Automatically
Station 3 -	Heat
Station 4 -	Heat
Station 5 -	Heat
Station 6 -	I.D. Water Flush
Station 7 -	Water Cool Part & Fixture
Station 8 -	Air Blast Fixture to Remove Water