Brazing Machine Specification

• Assembly: Two (3003) inlet/outlet tubes to header plate and bracket; (3 joints total)
• Paste Filler Metal: Fusion GNC-1070-400, non-corrosive flux, 1080°F liquidus.
• Production Rate: 180 parts per hour, one operator.
• Dimensions: 72" X 72" welded steel base, 42" dia. stainless toolplate cover, 30" dia. stationary plate for inner heat manifold, stainless water trough, PDC 18" direct drive indexer.
• Utilities: Electrical 440 VAC, 3PH, Control voltage 24VDC, Gas (144 CFH) Water (1 gallon/minute) Compressed air (28 CFM)
• PLC: Allen Bradley SLC 503 with DTAM operator interface.
• Safety Features: Sliding Lexan ® guards on 3 sides of machine with safety interock switches; stainless vent hood.
• Options: Air blower with variable speed drive for heat control, automatic port valve, and thermocouple heat feedback
• Sequence:

Station 1 -	Load Assembly
Station 2 -	Open
Station 3 -	Apply paste automatically
Station 4 -	Heat
Station 5 -	Heat
Station 6 -	Heat
Station 7 -	Ambient Cool
Station 8 -	Water Cool
Station 9 -	Air blow-off part and fixture
Station 10-	Unload brazed assembly